In order to meet the continuous demand of high quality clean compressed air, FILTER TECHNICS is glad to introduce you here the new range of coalescing filters designed to suit the most requirements and including:
PreFilters (coarse filtration and dust removal)
Fine Filters (particle removal down to 1 micron)
Micro Filtrers (particle removal down to 0,01 micron) Activated Carbon. (particle removal up to 0,01 micron. Maximum residual oil content down to 0,005PPM).

Our established experience has addressed our work on the way to offer products simple to use, efficient and with an high quality but having also a competitive prices.
A series of accessories complete this range:
Cyclone Kits - Differential Pressure Gauges - Manual and Automatic Condense Drain.

At the meantime FILTER TECHNICS offers a wide range of alternative filtering elements fully interchangeable with the original ones.

• Activated Carbon Filters A Series

  These cartridges are suitable to purify and keep the oil content in the compressed air Here Below are shown the most important data.
  Solid particle size [microns] : N.A.
  Quality class – solids (ISO 8573-1): N.A.
  Residual oil content [mg/m3]: 0.005
  Quality class – oils (ISO 8573-1): 1
  Pressure drop -new element [mbar/psi]: <120 / <1.74
  Change cartridge at pressure drop [mbar/psi]: 6 months
  
  Filter material: Activated Carbon Filter elements ''A'' must be changed periodically to suit application but at least every 6 months. Acctivated carbon filters must not operate in oil saturated conditions.

• Microfilter M Series

  These cartridges represent the first stage of Microfilters. Here Below are shown the most important data.
  Solid particle size [microns] : 0.1
  Quality class – solids (ISO 8573-1): 2
  Residual oil content [mg/m3]:0.1
  Quality class – oils (ISO 8573-1): 2
  Pressure drop -new element [mbar/psi]:<80 1="" 16="" li="">
  Change cartridge at pressure drop [mbar/psi]:600 / 8.7
  
  Filter material: Borosilic. Micro fibres

• Microfilter S Series

  These cartridges are suitable for a deepest filtration, because keep the smallest particles. Here Below are shown the most important data.
  Solid particle size [microns] : 0.01
  Quality class – solids (ISO 8573-1): 1
  Residual oil content [mg/m3]: 0.01
  Quality class – oils (ISO 8573-1): 1
  Pressure drop -new element [mbar/psi]: <90 / <1.3
  Change cartridge at pressure drop [mbar/psi]:600 / 8.7
  Filter material: Borosilic | Micro fibres

• Prefilter R Series

  These cartridges are suitable for using as Prefilter. Here Below are shown the most important data.
  Solid particle size [microns] : 1
  Quality class – solids (ISO 8573-1): 2
  Residual oil content [mg/m3]: /
  Quality class – oils (ISO 8573-1): /
  Pressure drop -new element [mbar/psi]: <50 / <0.7
  Change cartridge at pressure drop [mbar/psi]:600 / 8.7
  Quality class – solids (ISO 8573-1): 2
  Filter material: Acrile fibres, celulose