Compressed Air Filters
PreFilters (coarse filtration and dust removal)
Fine Filters (particle removal down to 1 micron)
Micro Filtrers (particle removal down to 0,01 micron) Activated Carbon. (particle removal up to 0,01 micron. Maximum residual oil content down to 0,005PPM).
Our established experience has addressed our work on the way to offer products simple to use, efficient and with an high quality but having also a competitive prices.
A series of accessories complete this range:
Cyclone Kits - Differential Pressure Gauges - Manual and Automatic Condense Drain.
At the meantime FILTER TECHNICS offers a wide range of alternative filtering elements fully interchangeable with the original ones.
Activated Carbon Filters A Series
These cartridges are suitable to purify and keep the oil content in the compressed air Here Below are shown the most important data.
Solid particle size [microns] : N.A.
Quality class – solids (ISO 8573-1): N.A.
Residual oil content [mg/m3]: 0.005
Quality class – oils (ISO 8573-1): 1
Pressure drop -new element [mbar/psi]: <120 / <1.74
Change cartridge at pressure drop [mbar/psi]: 6 months
Filter material: Activated Carbon Filter elements ''A'' must be changed periodically to suit application but at least every 6 months. Acctivated carbon filters must not operate in oil saturated conditions.
Microfilter M Series
These cartridges represent the first stage of Microfilters. Here Below are shown the most important data.
Solid particle size [microns] : 0.1
Quality class – solids (ISO 8573-1): 2
Residual oil content [mg/m3]:0.1
Quality class – oils (ISO 8573-1): 2
Pressure drop -new element [mbar/psi]:<80 1="" 16="" li="">
Change cartridge at pressure drop [mbar/psi]:600 / 8.7
Filter material: Borosilic. Micro fibres
Prefilter R Series
These cartridges are suitable for using as Prefilter. Here Below are shown the most important data.
Solid particle size [microns] : 1
Quality class – solids (ISO 8573-1): 2
Residual oil content [mg/m3]: /
Quality class – oils (ISO 8573-1): /
Pressure drop -new element [mbar/psi]: <50 / <0.7
Change cartridge at pressure drop [mbar/psi]:600 / 8.7
Quality class – solids (ISO 8573-1): 2
Filter material: Acrile fibres, celulose
Microfilter S Series
These cartridges are suitable for a deepest filtration, because keep the smallest particles. Here Below are shown the most important data.
Solid particle size [microns] : 0.01
Quality class – solids (ISO 8573-1): 1
Residual oil content [mg/m3]: 0.01
Quality class – oils (ISO 8573-1): 1
Pressure drop -new element [mbar/psi]: <90 / <1.3
Change cartridge at pressure drop [mbar/psi]:600 / 8.7
Filter material: Borosilic | Micro fibres